WhiteonRshad-7depot denmark 16.gif (4812 bytes)

Seals-It

PHONE NO.gif (4369 bytes)
[Add this page to the Navigation view to display hyperlinks here]
Home

Safety Gear Directory





 
6061-T6 Aluminum Tubing
Make your own rods the easy way.
OD Wall Rod End Size Price per
8 Foot Length
1/2" .120" 5/16" Call for Current Pricing
5/8" .155" 3/8"
3/4" .188" 7/16"
7/8" .250" 1/2"
1" .219" 5/8"
1 1/8" .250" 3/4"

Rod End Seals

ASPHALT AND DIRT RACERS USE SEALS-IT ROD END SEALS

They make setup easier and give you confidence that your suspension points move freely with no bind or excessive wear.

Rod End Seals keep dirt out and lube in -- don't spend all night cleaning suspension parts.



Seals-It Rod End Seals

SIZE

PART#

A

B

C

H

T

Pack of 6  

1/4"

WS 2500

.257

.375

.500

.125

.025

$ 14.10

5/16"

WS 3125

.325

.487

.710

.200

.047

$ 14.10

3/8"

WS 3750

.386

.525

.775

.220

.047

$ 14.10

7/16"

WS 4375

.445

.610

.910

.250

.047

$ 14.10

1/2"

WS 5001

.515

.710

1.125

.250

.047

$ 14.10

5/8"

WS 6250

.638

.900

1.250

.265

.047

$ 15.30

3/4"

WS 7500

.763

1.000

1.375

.375

.047

$ 15.90
1" WS 1000  -  -  -  -  - $ 17.10




French Clamp
Designed by Fuel and Ignition wizard, French Grimes, this Universal Magneto/Distributor Clamp allows the racer to re-install their ignition system without retiming the unit.

Made of billet aluminum, this patented French Clamp allows for quick removal
and re-installation without the
labor-intensive timing process.

Think about it -- qualifying is lining
up and you have a failure -- your
spare ignition has a French Clamp
- you change the ignition and you're on the track ready to take the green!

Part # FC 1001 
Price $ 87.00


Fuel Pump Seals

This Seals-It product originated in conjunction with Robert Yates Racing and after months of research and design changes and a year of actual racing, Seals-It introduces a fuel pump seal for Ford, GM and MOPAR applications.

This fuel pump seal designed for the Robert Yates Belt Drive system was developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm. The Seals-It kit is designed to keep hot engine oil in the engine and out of the fuel pump. Centrifugal force throws the hot oil into the fuel pump housing causing oil leaks and transfer of more heat to the fuel.

Our new seal kit uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm and keep the hot oil out of the pump cavity. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature.

Seals-It manufactures fuel pump seals for all styles of fuel pumps. Know the style you need when ordering.

Chevrolet
Part # CHFP4002  
Price $ 44.80

Ford
Part # FFPG4001  
Price $ 44.80

Mopar
Part # MOFP4003 
Price $ 44.80

 

 

Copyright 2003.  Seymour Enterprises Performance Products, Inc.  All rights reserved.